- 4 -
After the installation and configuration processes, the readers would automatically
detect active tags held by the car owner, and upload tag IDs to the Wiegand controller
immediately.
4. Repair and Maintenance
4.1 Top Tips to Keep the Device Working
1. Do not sabotage the 2.4G active tag by beating it or having a strong impact on it.
2. Do not disassemble the 2.4G tag, unless for changing batteries following the
procedures as instructed in this manual.
3. Once a reader has been fixed, please do not to move its position unless it is
malfunctioned. Otherwise the stability of the whole system could be affected.
4. As to BGC-01/BGC-03 tag, the labels on the tags help to protect the tags against
water or moisture, please do not tear them down unless for battery changing.
4.2 Troubleshooting
1) If the reader is powered on (the green LED is on and flashing), but does not read
tags (the green LED never switches to the Red LED, and there is no beep sound from
the buzzer), please check and make sure the green wire has been connected to the
white wire.
2) If the reader works properly, but the controller could receive no data, please check
the wiring sequence of the yellow and the blue wires to the wiegand ports. If the
sequence were wrong, please cut off the power supply and then swap the yellow and
blue wires to the correct connection.
5. Battery Replacement Instructions for Tags
5.1 BGC-03 Battery Change Procedures
