background image

 8

 

 

 

• 

This machine is designed to blow leaves or debris. Any other use is not intended.

 

 

 

• 

The customer is responsible for third parties and any damage to their property. 

 

 

 

• 

 Never attempt to alter engine governor to increase maximum speed.

 

 

 

• 

Never modify a guard and keep them in good working order.

 

 

• 

Never look into the intake or discharge chutes when the unit is running.

 

 

• 

Keep the air intake on the engine clean of debris.

 

 

• 

Never remove the air cleaner while the engine is operating.

 

 

• 

Never leave the unit running unsupervised.

 

 

• 

The unit should only be used with ample lighting (daylight preferred).

 

 

• 

The front discharge position is used for debris removal along fences and walls and 

other straight surfaces. Moving the deflector to the front position while the unit is run-

ning will keep it in that position until the unit speed is reduced or is shut off. The de-

flector can  manually returned to the side discharge position by moving the lever. 

 

 

• 

The side discharge allows the operator to form piles of debris to the side or remove 

from a driveway or other surface. The airflow deflector can be changed in attitude to 

either blow across a surface or get underneath leaves to facilitate blowing of wet 

leaves. 

 

 

• 

Check safety labels daily and replace when necessary.

 

 

• 

The  rear tires should be inflated to 30 PSI. The front to 20 PSI

 

 

• 

Check engine oil daily or during extended operation

 

 

 

 

             Operation

 

Содержание BL 400

















Отзывы: