12
When the units are
turned on, the start up
sequence begins and
the fan starts in the last
setting.
After start up the air
quality starts to be
analysed and is
displayed on the control
knob after 9 seconds.
3. Turn on
3b.
3a.
To turn units
on
flick
right or left once.
4. Adjusting the fan speed
By flicking the control knob to the right the fan
speed sequence goes round in a loop from Low to
Medium to High to Auto mode to Low again etc.
Note:
The units must be
connected to the
power supply port
and powered up (i.e.
the car´s ignition is
on.)
After 3 blinks the control
knob displays the
current air quality (see
“Air Quality Indication”).
1
2
3
4
LED behaviour for each fan speed:
Low speed (1) = 1 white LED blinks 3 times
Medium speed (2) = 2 white LEDs blink 3 times
High speed (3) = 3 white LEDs blink 3 times
Auto mode (4) = 6 white LEDs blink 3 times
ARTWORK for 501092_User_Manual_P2iD_EN_Rev02.indd 12
2018-10-05 17:04
