Blueair BSF23, Руководство по установке и эксплуатации

Страница: 6 / 16

1. Plug in and turn on the power switch located on the bottom of the top grill.
The Display panel will be lighted. The compressor will begin to run.
2. The default temperature setting is 35°F (+2°C)
3. The compressor is automatically cycled by the electronic controller (PCB).
4. Temp. Control range is 39°F ~ 28°F (+4°C ~ -2°C)
5. The interior light is activated by the door switch when the door is open.
6. Evaporator fan motor(s) will run after all doors are completely closed.
Refrigerator
BSR23
BSR49
BSR72
BSR23G
BSR49G
Operation
1. POWER CORD
- Make sure the power cord is connected to the proper voltage. (115V, 60Hz)
- Compressor warranties are void if compressor burns out due to a usage of improper voltage.
- A protected circuit of the correct voltage and amperage must be used for connection of the line cord.
- Turn ‘off ‘ the power switch before disconnecting the power cord whenever performing
maintenance service or cleaning the refrigerated cabinet.
- If the power cord of Refrigerator (Freezer) is damaged, it should be replaced by the
manufacturer or service agent or a similarly qualified person in order to avoid a hazard.
2. RE-STARTING
- If disconnected, wait 5 minutes before re-starting.
Caution