Blueair BLMI-300A, Инструкция по установке и эксплуатации

Страница: 33 / 36

32
33
4.4 Exterior Cleaning
4.5 Storage Container and Scoop
4.6 Air Filter
4.7 Condenser
To prevent corrosion, clean oil or dust in outer surface with cleaning towel or neutral detergent.
Clean storage container interior and scoop with neutral detergent. Wash with clean water afterwards.
Storage container is for ice only. Do not store any other material in the storage container.
Dust in the filter may decrease function of ice machine. Check the filter once every two weeks and if any
dust is found, clean by using warm water and neutral detergent. Dry the filter completely and reuse.
Check the condenser at least once a year and if cleaning is necessary, clean with vacuumand brush.
Cleaning interval may be shorter depending on the installation area.
4.8 How to Prepare for Long Term Storage
1) Wash and sanitize the ice machine.
2) Press “Power” button to turn off the ice machine.
3) Press “Power” and “Check” buttons for 2 seconds at the same time to drain remaining water inside of the
machine.
4) “drn” will display and once the remaining water level minimum level, the machine stop drain.
5) Disconnect the host connects water tank and pump motor to drain all remaining water inside of the unit.
Instruction can be found on 4.2.3 Modular Product Disassembly
6) Disconnect power code and lock water supply valve.
7) Disassemble water supply inlet and drain outlet at the back side of the machine.
8) Remove all remaining water inside of hoses installed in the machine, water supply inlet and drain outlet by
using air gun.
9) Nebulize sanitizer on the inside of the machine except for machine room and wait until they are completely
dried.
When not using the ice machine for a long period, remove all ice from the storage bin and drain all
remaining water in the water tank. Clean and dry the storage bin. Also, remove all the water from the
ice machine to prevent the water supply hose from getting frozen under low temperature during winter.
Turn off the product until the temperature is warm.