Headphone volume control
•
Control the volume of Yeti Pro’s headphone output by adjusting the volume knob — no need
to click through software menus to find the right headphone volume. Yeti Pro’s headphone volume control is a digital volume
control, so most operating systems will remember the volume position from previous use.
Headphone output
•
Yeti Pro includes a standard 1/8" (3.5mm) headphone jack for monitoring and playback.
You can use Yeti Pro’s headphone output to monitor your microphone recording in real-time, without latency delays.
Or, use the Yeti Pro’s headphone amplifier to play back music, movies, or tracks from your computer with the
incredible fidelity and detail provided by Yeti Pro’s dedicated headphone amplifier and high quality digital-to-analog converter.
USB connection
•
Yeti Pro supports USB audio class 2.0. For proper function, Mac users need to install OS 10.6.4 or
higher, and Windows users will need to download the Yeti Pro driver from www.bluemic.com/yetipro. Yeti Pro connects to your
computer with one simple USB cable. Plug the mini USB (small connector) into the USB port
6
NOTE: Headphone output and volume control is not functional when using the microphone
in analog mode due to the insufficient power provided by XLR interfaces.
on Yeti Pro, and plug the other end into an available USB port on your computer. To perform at its best, Yeti Pro should
be plugged directly into a powered USB port, so avoid connecting through USB hubs or other USB multipliers.
5-Pin XLR Connector
•
On the bottom of Yeti Pro, you will find a male 5-Pin XLR connector. Plug in the included Y-Cable
to connect Yeti Pro to a standard microphone preamplifier(s) via standard XLR connectors, or use your own 5 pin stereo XLR
cable to connect the Yeti Pro to a stereo preamplifier. Yeti Pro’s included y-cable outputs stereo audio via the left and right XLR
connectors when the mic is in stereo mode. When Yeti Pro is used in the other modes, the mono signal is cloned and output to
left and right XLR connectors.
7
NOTE: Yeti Pro is not capable of simultaneous analog and digital operation. To ensure
proper operation, only connect the digital (USB) or analog (XLR) connectors
at any given time. In the event Yeti Pro becomes unresponsive, simply unplug
all connections for 10 seconds and re-connect your Yeti Pro with the desired
output cable.
