Quickstart Guide
The MS-6 Chemical Feed Flowmeter is shipped with the following
contents:
!
MS-6 Chemical Feed Flowmeter
!
Meter Body Connection Fittings
!
3/16” Hex Key
®
!
Flash Drive (Operating Manual and Blue-Central )
!
USB-A to USB-C connector
!
Power Supply (user configurable)
The MS-6 was designed to be installed and operated by qualified
personnel only. Do not attempt to install or operate the meter if you are
unsure. Seek qualified assistance.
Please note that warranty coverage
does not include damage due to misuse or improper installation.
STEP 1 Unpacking
®
STEP 2 Install Blue-Central
®
To configure the
MS-6, Blue-Central must be installed and running on a
®
desktop or laptop computer. Blue-Central is Blue-White’s proprietary
®
software application. To install Blue-Central , power on the desktop or
laptop computer and insert the provided USB Flash Drive. Doubleclick
®
®
the .exe file to install and run the Blue-Central Application. Blue-Central
allows the user to update firmware as well as view the meter’s device
details.
Note:
The provided USB Flash Drive also contains the MS-6 Operating
Manual.
Connect the meter to the desktop or laptop computer with the provided
®
USB to USB-C cable. The meter will appear on the Blue-Central
dashboard. The meter will appear on the dashboard (it could take up to
30 seconds).
Note:
A power supply is not needed to configure the meter.
®
Note:
Installing Blue-Central will add a shortcut to the desktop screen.
STEP 3 Connect
STEP 4 Configure
It is suggested that prior to mounting the MS-6
Chemical Feed meter the user configures its
operating parameters. The meter will work
without performing a configuration, however the
default settings may not be adequate for the
required application. For assistance in
configuring the meter, refer to the provided
Operating Manual (page 7, section 6.0) located
on the Flash Drive.
Fault & Warnings
Relay Output
Frequency Output
4-20 mA Output
Pulse Output
Blue-White’s MS6 Series
Setup
Sodium Hypochlorite 12.5%
Name
Chemical Profile
Blue-White’s MS6 Series
Blue-Central
General
DASHBOARD
SETTINGS
ABOUT
i
Blue-White
®
Blue-Central®
Setup and Configure
Dashboard
Industries, Ltd.
Cancel
x
Save
Response Sensitivity
Responsive
Stable
8 seconds
®
MS-6 Chemical Feed Flowmeter
