Suitability
It is the responsibility of the user to determine the
suitability of the flow meter in their application.
Flow meters are tested and calibrated for water only.
IMPORTANT
Safety instructions
PRE-INSTALLATION
Before you begin
Planning
Mounts and supports must be sturdy enough
to support the plumbing and prevent vibration.
Vibration and heavy loads will damage the meter.
Compatibility
Ensure the piping is straight horizontal SCH 40.
PRESSURE
Do not exceed 75 PSI (5.2 bar).
High pressure and temperature will
damage the meter.
CAUTION
Always wear eye protection when
installing or removing flow meters.
CAUTION
Follow these instructions before
installing your flow meter to avoid
failure.
LOCATION
Meters are suitable for indoor and
outdoor use.
In the Box
Flow meter
Rubber gasket
Clamp x2
Quick start guide
Tools Needed
Drill
Drill bit 5/8” (1”–4” flow meter)
Drill bit 3/4” (6”–8” flow meter)
Drill bit 1/4” (Optional pilot hole)
Fine sandpaper (Optional)
Felt pen
Tape measure
Flathead screwdriver