Blue-White FLEXFLO M4 Series, Руководство по эксплуатации

Страница: 26 / 64

To Enable Auto-Prime:
1
Open the App Drawer
2
Select Settings
3
Select Auto-Prime
4
Enable Auto-Prime
5
Input Values
!
Prime duration (in seconds)
!
Percent Motor Speed
6
Select Save to save the settings
8.8 Auto-Prime
This mode will allow the user to prime the pump remotely using the dry contact. Both
prime duration and percent motor speed is configurable.
Default settings: 60 Seconds at 100% Motor Speed
To Prime The Pump:
1
Open the App Drawer
2
Select Prime
3
Select Start to Prime the pump
4
Pump will run at 100% motor
speed for sixty seconds
5
Pump will remain in Prime
Input
8.7 Prime
This mode allows the user to prime the pump at 100% motor speed for sixty seconds. After the
prime is complete the pump will remain in this mode ready to be primed again.
To exit: select another input method.
Page 26 ®
FLEXFLO M4
Page 27 ®
FLEXFLO M4
8.0 Input Setup 8.0 Input Setup