Blue Wave NG1216, Руководство по сборке

Страница: 6 / 8













 













Make sure your table is level in both directions using Leg Levelers
making any adjustments using the Climatic Adjusters. before




Important: nuts should be tightened slowly with 1/4 to 3/4 turns at a time. It may take a few days
shuffleboard to completely react. DO NOT over tighten, as this can cause permanent damage
to the Climatic Adjusters and your table.
for the




NOTE position of Climatic Adjuster.
It should be approx. 3/4” below table
bottom. You may have to move it
down, by adjusting all nuts, before
making any surface adjustments.
NOTE position of Climatic Adjuster.
It should be approx. 3/4” below table
bottom. You may have to move it
down, by adjusting all nuts, before
making any surface adjustments.