FULL HD MEDIA PLAYER/DTV RECORDER (RTD1185 BOARD)
PAGE 4/35
67 B6 7 B6 7B
1.6 Connecting to an Digital Amplifier
(1) Plug in the RCA connector on your coaxial cable to the player’s S/PDIF Coaxial jack. Or if
you use optical fiber, please plug in the Toslink connector on your optical fiber to the player’s
S/PDIF Optical jack;
(2) Plug in the other connector on your coaxial cable or optical fiber to the digital audio device
(digital amplifier or decoder).
Note
: Optical fiber and coaxial cable are not supplied.
In this way, you can enjoy powerful Dolby Digital, DTS, or MPEG sound.
68 B6 8 B6 8B
1.7 Connecting to a LAN
To connect to a LAN (Local Area Network) you require a cat5, cat5e or cat6 network cable (not
supplied).
(1) Connect one of the crystal plugs on the cable to the player’s RJ45 LAN socket;
(2) Connect the other crystal plug on the cable to a RJ45 LAN port on your router, switch, or
hub devices.
69 B6 9 B6 9B
1.8 Connecting to a WLAN
(1) Make sure the player is powered on;
(2) Plug the Wireless LAN USB Adapter (i.e. Wi-Fi USB Dongle) to the USB HOST port of the
player,
or you could use the intergrated Wifi Antenna
Note
: The Wi-Fi Dongle is an optional accessory sold separately.
2.
14B 14B 14
Power On / Off
70 B7 0 B7 0B
Power On
After connecting the DC IN jack and press the switch on the back panel, the player will soon
enter the home screen, and the power indicator will turn blue.
71 B7 1 B7 1B
Power Off
Press the power button on the front panel, the player will soon enter standby mode, and the
power indicator will turn red. Then unplug the power cord to cut off the power supply.
