Blue Star HNHW18CA, Руководство пользователя

Страница: 22 / 29

Troubleshooting Chart
If the Input voltage
to the stabiliser is
below the acceptable
range, the
airconditioner will
not turn on
Unit does not cool
even after the
normal time delay
of approx. 2 minutes Use the remote to
turn the compressor
on
The airflow paths of
both the indoor &
outdoor units are
not free Remove all
obstructions to make
the airflow paths
free
The air-filter is
not clean
Clean the air-filter
NOTE: If the unit still does not work, or if any other types of
symptoms are encountered, shut off the mains (switch fuse
unit) and call the service engineer / technician.
Compressor is off
(not in Auto or Cool
Mode)
Symptoms Possible Causes Suggested Remedy
Unit does not start MCB has tripped Reset MCB
Fuse has burnt Replace fuse wire
Input voltage to the
stabliser is below
acceptable range
MCB
FUSE
STABLISER
AIR FILTER
20