7
ASSEMBLY
NOTE: WE STRONGLY ADVISE ONLY FINGER TIGHTENING BOLTS
DURING INITIAL ASSEMBLY. ONCE ALL BOLTS ARE INSERTED, FULLY
TIGHTEN ALL BOLTS. DO NOT OVERTIGHTEN.
STEP 1
Insert the ash catch connector [G]
through the ash catch [F] and into the
bottom of the fire bowl [D]. Secure the
ash catch connector with two nuts [J],
one on either end of the connector.
STEP 2
Insert four M6 x 15 mm bolts [H]
through washers [I], into the holes
in the fire bowl [D] from the top and
then through the holes in the base [E].
Secure with washers [I] and nuts [J]
from underneath the base.
D
D
F
G
J
J
H
E
I
J
I
