Blue Sky Network D411, Руководство по установке

Страница: 16 / 19

D411 Installation Guide Configure
CONFIGURE
PARAMETERS
Before using your D411 it is recommended that you take time to check and update the parameters on the
device to prevent unexpected data usage. By default Blue Sky Network configures the D411 at the
factory default setting of 120 second reporting (reports once every 2 minutes.)
The D411 system parameters are all managed using the SkyRouter system. Administrators of
SkyRouter can customize the parameters from the SkyRouter interface and update devices remotely
(device must be powered on and have sufficient signals to receive the update.) Please consult your
SkyRouter user manual for more specific information about sending parameter updates.
Adjusting the parameters on your device will change the behavior of your device. Some parameters
control the frequency at which normal position reports are sent, and other will generate events that will be
sent in addition to your normal position reports.
SKYROUTER PARAMETER UPDATE SCREEN
The following images show the available D411 parameters as seen in the SkyRouter user interface, these
are the default settings:
D411 PARAMETER EXPLANATION
Normal Position Reports
GPS Position Reporting
Enabled
This option will enable or disable normal position reports to be generated
based upon a timer.
Time Based Interval Normal position reports will be generated at this interval.
Event Reporting
Quick Position Events
Reporting Interval (sec): Reporting interval when Quick Position is activated.
Count Number of Quick Position messages to be sent.
100505 Page 16 of 19