Blue Seal G57, Инструкция по установке и эксплуатации, Страница: 12 / 25

Installation
10
7. If Target Top is fitted with a Refrigeration Cabinet, cabinet must NOT be installed in an explosive
environment, the open air or exposed to rain. The following considerations should be made;-
 Cabinet must be located away from heat sources (radiators ovens and other heat generating
kitchen appliances) and direct sunlight.
 Must be protected from draughts.
 Air circulation around condensing unit must not be obstructed.
Clearances
NOTE: Only non-combustible materials can be used in close proximity to this appliance.
* For additional clearances information refer to Refrigeration Cabinet Installation and
Operation Manual supplied with Refrigeration Cabinet.
Assembly
NOTE:

Leg Stand Model (G57-LS), will require assembly. Refer to 'Leg Stand Models Only'
information below for assembly instructions.

All Models are delivered completely assembled. No further assembly is required, with
exception of Leg Stand Model (G57-LS), this will require assembly. Refer to Fitting of
Adjustable Feet / Rear Rollers to Leg Stand Units' information overleaf for assembly
instructions.

Appliance rear leg housings can be fitted with:-
Adjustable feet to assist with levelling of appliance on uneven floors.
Rear rollers to enable appliance to be easily moved for positioning and cleaning purposes.
Optional Accessories (Refer to Replacement Parts List)
 Plinth Kit. For installation details, refer to instructions supplied with each kit.
Bench Models
1. Check all feet (and castors) are securely fitted.
2. Adjust feet to make Target Top steady and level.
Combustible Surface Non Combustible Surface
-B /-CB /-LS models:
Left / Right Hand Side 50mm 0mm
Rear 50mm 0mm
-RB model:
Sides / Rear 75mm 75mm *