10/3/2018
Newton Gripper
http://docs.bluerobotics.com/newton-gripper/#specifications
13/17
Cable Management
To clean up the external Newton Gripper cable, you will need the bag of 5 zip ties and your scissors/wire cutters.
The primary goal of cable management is to prevent the wires from getting cut by the propellers. Make sure to check
that no wires can reach the propellers after you have nished routing the Newton Gripper cable. Below is an example of
what the cable routing should look like.
Reinstall Buoyancy Blocks and Fairings
To install the new buoyancy blocks and fairings, you will need the following parts and tools:
16 x Fairing screws that were placed o to the side during disassembly
4 x Fairings with buoyancy installed that were placed o to the side during disassembly
1 x #1 Phillips head screwdriver
1. Reinstall Original Fairing Blocks onto ROV by installing the screws through the center panels and into the fairings.
