Page
8
of 1
4
Quick & Easy Assembly
To complete assembly you will need:
•
(1) precision-filled standard barbeque propane cylinder 9 kg (20 lbs) with
external valve threads;
•
125 mL leak check solution - mix (1) part dishwashing soap with (3) parts
water
1. Attach Post to Base
•
Slide post into base
•
Press down until snaps engage
2.
Install Igniter Battery
•
Open battery compartment by turning cap on bottom of engine counter-
clockwise
•
Place the supplied AA battery into compartment – negative (-) end goes in
first
•
Secure cap by turning clockwise until it stops
3. Attach Engine to Post
•
Place engine onto post
•
Press down until the snaps engage
•
Slide SkeeterVac® WaveDrawer
™
into engine
•
Position SkeeterVac® FineTune™ ring and lure in place
•
Place rain cover on engine and twist clockwise to secure
4. Install Propane Cylinder
•
Use only Transport Canada approved 9 kg (20 lbs.) cylinders with collar fully
intact
•
Place full propane cylinder upright on base so system is arranged for vapour
withdrawal
•
Place cover over cylinder
•
Connect gas line to cylinder by turning knob clockwise until it stops
•
Turn cylinder ON and test for leaks
o Spoon leak check solution at all "x" locations
o If any bubbles appear turn cylinder OFF, reconnect and re-test
o If no bubbles appear after one minute turn cylinder OFF, wipe away solution
and proceed
Tip - to locate a retailer in your neighborhood that provides precision-filled
cylinders, visit www.bluerhino.com or call toll free 1.800.258.7466.
