background image

Contact 1.800.762.1142 for assistance. Do not return to place of purchase.

page no.

This grill is designed to operate with a one pound  
7.75” or 10.6” high disposable / 16.4 oz. or 14.1 oz.  
propane gas tank (DOT 39 Cylinder). (Figure 1)

DO NOT ATTEMPT TO REFILL ANY ONE POUND 
(16.4 oz. or 14.1 oz.) PROPANE GAS TANKS!

Connect LP Gas Tank

Only cylinders marked “propane” may be used.

Note

: Some 1-lb cylinders may form frost when near 

empty.
1.  All control knobs must be in the “OFF” position. 

(Figure 2)  

2.  Lubricate the threads of the regulator with 

petroleum jelly. Line up threads on LP gas tank 
with regulator. 

3.  Insert and rotate LP gas tank clockwise until 

they fit snugly together. HAND TIGHTEN ONLY. Be 
careful not to cross threads when screwing in 
canister. (Figure 3a)

4. Test for leaks, see “Checking for Leaks” section.

Disconnect LP Gas Tank

1.  All control knobs must be in the “OFF” position. 

(Figure 2)  

2.  Rotate LP gas tank counterclockwise until it is 

loose. (Figure 3b)

3. Store the LP gas tank in a proper location.

Burner Connection

Make sure the regulator is securely fastened to the 
burner.  (Figure 4)
Note: The brass nut should be 1/4 to 1/2 turn past 
tight. The regulator will rotate 360º even when the 
brass nut is tightened.
If your unit was assembled for you, visually check 
the connection between the burner and control 
valve. 
If you have questions contact 1.800.762.1142 for 
assistance.

  WARNING: Failure to inspect 

this connection or follow these 

instructions could cause a fire or an 

explosion which can cause death, 

serious bodily injury or damage to 

property.  

Checking for Leaks

1.  Make 2-3 oz. of leak solution by mixing one part 

liquid dishwashing soap with three parts water.  

2.  All control knobs must be in the “OFF” position. 

(Figure 2)  

3.  Spoon several drops of solution, or use squirt 

bottle, at all “X” locations. (Figures 4 & 5)

4.  Inspect the solution at the connections, looking for 

bubbles.  
 a.  If NO bubbles appear after one minute, the 

connections are secure. Wipe away solution 
and proceed.

  b. If bubbles appear, you have a leak.
    1.  Remove the LP gas tank and reconnect, 

making sure the connection is secure.

    2.  Retest with solution.  

 If you continue to see bubbles after several 
attempts, disconnect LP gas tank and 
contact 1.800.762.1142 for assistance.

First Use 

1.  Make sure all labels, packaging and protective 

films have been removed from the grill. 

2.  Remove manufacturing oils before cooking on this 

grill for the first time by operating the grill for at 
least 15 minutes on “HIGH” with the lid closed. 
This will “heat clean” the internal parts and 
dissipate odors. 

Assembly Instructions (continued)

Figure 1

 

1 lb

453 g

7.75 in

. /  19,7 cm

3.875 in. / 9,8 cm

2.9 in. / 7,4 cm

1 lb

453 g

10.6 in.

 /  26,9 cm

Figure 2

Figure 3a                Figure 3b

 

 

Figure 4

X

Figure 5

 

X

X

Figure 6a

Match

Operating Instructions

13

Lock Lid

Unlock Lid

14

Fold Legs

Note:

 Always lock lid before folding legs.

Unfold Legs

Note:

 Always open legs completely and secure in place before lighting.

 

Содержание GBT1030 Series













Отзывы: