2
Cleaning Instructions for Burner, Pilot Assembly, and Emitter Screen • Series: 220000-450000
For assistance call: 1.800.762.1142
Tools Required for Assembly:
10 mm open end wrench
12 mm open end wrench
9/16” open end wrench
5/8” open end wrench
11/16” open end wrench
9/16” socket and ratchet
9/16"
Socket extension
# 2 Phillips screw driver
Pliers
Compressed air – canned or
compressor with a hose
Soft bristle brush
Brass brush
Heavy-duty pipe cleaners
Non-abrasive Scouring Pad
Rubber gloves
Leak test solution: 1 part liquid soap
and 3 parts water
1. Installation and repairs
should be done by
a qualified service
person.
2. Use only Blue Rhino Global
Sourcing, Inc. factory
authorized parts. The use
of any other part that is not
factory authorized can be
dangerous and will void
your warranty.
3. Do not use flammable
solutions or material to
clean heater or heater
parts. Use only warm
soapy water to clean
outside of heater.
4. Do not submerge control
valve in water.