2
In disconnected idle mode , BT mobile can perform the Bluetooth paring with
car kit, the passcode is
1234
, if pairing is successful , the screen will be shown as
below for 2 seconds :
When car kit builds the Bluetooth connection with the BT mobile, it will enter the
working idle mode .
3.
Working idle mode :
the screen will be like following :
In the working idle screen , the car kit will totally open the service and data
records for the member user .
In the upper middle zone of the working idle screen is the Bluetooth mobile phone
name , which was saved in the Bluetooth setting up menu of the mobile phone
and can be edited by the user , the information can be read by car kit . In both
sides are Antenna and Battery status logos indicating the Signal and Battery level
of the BT mobile, the function will be subjected to the Bluetooth mobile phone can
send out these data by Bluetooth.
In the main function zone , default is set to “
Phone Book
“ function as the
logo shown in the picture, user can rotate the
Smart
key to select the other
functions which include “
Voice dialing
” , “
Number Dial
” , and “
Settings
“, their
screen logo are shown as below:
Guest user:
When the 2
nd
user was connected , it will be regarded as a
guest , the LCD screen will show like following:
Mobile phone name
Antenna
status
logo
Battery status logo
Main
function
zone:
default is phone book .