BP307
www.bpfasteners.com
Page 4
SELECTION OF LOADS AND SAFETY
1.
Always make a fastening test after being
sure that the base material is suitable for
powder actuated fasteners. Failing to
determine the appropriate power level to
be used may result in the use of excessive
power, allowing the fastener to pass
completely through the work material,
causing severe injury or death to others
who maybe in the path of the fastener.
2.
All operators must always select the level of
the loads by the power level to avoid the
use of incorrect loading for the same reason
as that of# 1.
SAFETY AT WORK
1.
Operators and by standers must always
wear safety glasses and approved hearing
protection. Failure to do so can result in
blindness or serious eye injury from debris
and hearing loss for unprotected exposure
to constant or repeated noise from the
fastening tool.
2.
Keep the work area clear of by standers and
unnecessary materials that may interfere
with the safe operation of the tool.
Operating the tool in a congested or
disorderly area may affect the ability to
operate safely.
3.
Never operate
the tool when inflammable
or explosive materials are nearby. Powder
loads burn and create sparks when fired
and could ignite these materials or vapors.
4.
Always provide warnings within 50'of the
area where fastening is being taken place.
Sign should state: "Caution powder
actuated tool in use." Failure to warn others
can result in serious injury or death to
them. Contact your supervisor for this sign.