Installation Instructions
TC6011 Bracket Kit
Serial Number
The TC35270 steering control is recommended for use with this bracket kit.
1. Set front wheels of vehicle in straight ahead position.
2. Using 1-1/8" socket, remove two (2) existing
bolts and nuts from shock mount bar on the
driver's side.
3. Install the anchor bracket on the shock mount
bar on the driver's side using the existing
bolts and nuts. Tighten to manufacturers
specs.
4. Install solenoid end of TruCenter to back of
anchor bracket with a 3/4"-10 x 6" bolt, 3/4"
fl at washer and 3/4"-10 whiz nut, torque to
180 ft/lbs.
5. On the passenger's side, install the tie rod
bracket using the appropriate U-Bolts for your
application. DO NOT TIGHTEN.
The tie rod
bracket may be rotated to insure steering
control remains parallel to the ground.
405-00164 Rev. C
Page 1 of 3
3/18/14
