(866) 455-2135
blueoxaircleaners.com
Blue Ox is a Product of Air Cleaning Specialists, Inc.
BLUE OX products are designed to improve your environment. The OX2500D series collects dust, smoke, oil mist,
oil smoke, and other atmospheric pollutants in industrial plants, shops, schools, and factories with high efficiency,
2 or 3 stage filtration. It is a complete air filter packaged unit that can be installed easily and used as a free
hanging air filter unit to clean the ambient pollutants, smoke and haze.
The OX2500D
consists of a 4” pleated pre
-filter that traps dust and larger particles. The second stage, micro-glass
multi-pocket bag filter has 98% arrestance and either 65 or 95% efficiency (depending on the application) on the
atmospheric dust spot test, removing smoke and other submicron size particles from the air. Changing
out the
filters is easy as it requires no tools. The 4” pre
-filter pulls from the unit and can be replaced. The
main filter is
located directly behind the 4” pre
-filter and pulls out also. For light odors, there is an optional 2
”
50% bypass
carbon filter available.
MOTORS
All direct drive motors are protected with automatic restart overload protection.
All belt driven units must be protected externally.
OPERATION
Do not operate your units without filter for more than a few minutes at a time.
MAGNEHELIC PRESSURE GAGE OPTION
This is an option to help determine when to change the filters. As the bags fill with contaminants, the needle on
the gage will rise. We recommend changing the bags between 1.25
–
1.50 above the reading with clean filters. It is
normal to change the pleated twice (or more) as much as the inside bag filter. After the pleated has been change
and there is no longer a drop in pressure, then it is time to change main filter. The reading may vary depending
upon the contaminants. Please consult your Sales Engineer for further information.
FILTERS
All units are equipped with replaceable type media filters. In some cases, where contaminants being picked up are
dry, it is possible to blow the pre-filters and reuse them. Filters are available in a number of different degrees of
efficiencies. The filters in your new OX2500D unit have been selected by your representative to best collect your
particular type of contaminant.
Media type filters actually become more efficient as they load with contamination. However, as the filters load up,
the air flow volume will decrease and eventually will reach a point where they must be replaced to restore the
original air flow. Changing the filters in your new OX2500D air cleaner is easy. Old filters are simply pulled out of
the entrance end of the unit and new filters are installed. No tools are required. Turning the unit on when
installing new filters will help to pull them into place.
GENERAL NOTE: CLEANING AND INSPECTION OF CABINET
After the dirty components have been removed, inspect the cabinet interior. Remove foreign material, wipe
interior, and clean all filter seating surfaces.
When installing new filters the opening in the bag filter and the pre-filter should be in a vertical position. Be sure
the cloth part of the bag does not bunch up between the bag header and the angle iron filter stops on the cabinet.
The pre-filter should be installed with the wire mesh to the inside of the unit. Replacement filters can be supplied
by your representative.
LOUVERS
Four way lovers are provided on all units to permit you to direct the discharge air away from pilot lights or heaters
and to help you obtain the best air flow pattern for maximum cleaning.
PARTS
ALWAYS USE BLUE OX REPLACEMENT FILTERS & PARTS TO MAINTAIN WARRANTY.
TO ORDER REPLACEMENTS PARTS: CALL 866-455-2135 |EMAIL [email protected].
11088 Gravois Industrial Court
,
St. Louis
, MO 63
128
