Blue Ox DH2303 Скачать руководство пользователя страница 9

Страница: 9 / 9

DH2303

2016 Chevy/GMC 2500/3500 (Standard & Long Box)

Installation Instructions

Page 9 of 9

Storing the Hitch Ball

1. Rotate the locking collar to release the

latch pawl. Align the ball with the collar

and drop the ball into the hitch.

2. Release the locking collar.

CUSTOMER SERVICE COMMITMENT

Blue Ox® is committed to providing you with exceptional customer care throughout your lifetime

with our products. Our team is here to assist you with any questions you may have regarding the

performance of your product.
Additionally, please visit our website to see which rallies our Destination America team will be

attending. For a nominal fee, our service technician will service your towing system to ensure it’s in

proper working condition. Also, as a commitment to our customers, should you visit our factory, you

can stay at our full service Blue Ox® campground at no charge along with enjoying a factory tour.

Again, thank you for being our customer and for the confidence you have shown in the

performance

of our products. It is because of customers like you we enjoy the success we have

today.

Shop for other trailer hitches & towing accessories on our website.

Содержание DH2303









