![Blue Ox BX7365 Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/blue-ox/bx7365/bx7365_installation-and-operation-manual_2775933005.webp)
BX7365
Alpha
®
Tow Bar
Operation Manual &
Installation Instructions
405-0154 Rev C
Page 5 of 7
7/29/13
Tow Bar Storage Position
Figure 1
Figure 2
Figure 3
1. Swing the legs inwards towards each other (Figure 1).
2. With legs together, swing them up towards the towing
vehicle until the hold up bolt passes through the gap in
the hitch connector (Figure 2).
3. Rotate the legs down to either side until the hold
up bolt engages completely to the side of the hitch
connector slot (Figure 3).
This tow bar requires periodic maintenance. It will be subjected to road dirt and weather during use.
We recommend a full tow bar service every two (2) years or 10,000 miles. The following tips will help
maintain the condition of your new tow bar.
1. Keep the tow bar covered when not in use, on or off of the towing vehicle. This will cut down on
the dirt build up on the legs and joints of the tow bar. A BX8875 tow bar cover is recommended.
2. Periodically clean the entire surface of the tow bar with a mild soap and water solution. Wipe dry
with a clean cloth.
3. Check for cracked welds and repair any loose, worn or damaged bolts, rubber boots or cap plugs.
4. Approximately once per year or if it is difficult to move the legs in and out, remove the small cable
ties holding the rubber boots to the legs and slide the boots back. Clean off the inner legs with a
silicone spray or brake cleaner. Apply a light coat of multipurpose grease to each leg to ensure a
smooth operation. Secure each boot back in place with an 8” UV rated nylon cable tie.
Note:
Only the inner legs require grease for normal operation. All other tow bar joints rely on self
lubricating washers, if these joints become to stiff clean as directed with soap and water.
5. Before each trip check for movement in the baseplate. Grab the baseplate tabs and move up and
down, making sure the baseplate is still secure to the vehicle’s frame.
If the tow bar’s legs do not operate smoothly or the joints become excessively loose, take
your tow bar to an authorized Blue Ox Dealer or call Blue Ox Customer Care for repairs.
Tow Bar Maintenance