Vehicle Weight:
The weight of this vehicle is near the Class
III, 5,000 lbs. rating limitations. Some models,
depending on options, may well exceed this
5,000 lb. rating. Be sure to confi rm the weight of
your individual vehicle before towing.
Tow Bar Adapters are NOT to be used with
vehicle’s weighing over 5,000 lbs.
Installation Notes:
The metal bumper
and tow hooks are removed for installation.
The tow hooks are not reinstalled. Drilling is
required.
The dimensional variations between otherwise
identical vehicles can be considerable.
While the baseplate was designed for easy
installation, it may be necessary to tailor the
baseplate slightly to compensate for auto
manufacturer’s tolerances. These minor
adjustments may include fi ling a hole slightly,
bending electrical rods or bending end plates.
The BX8869 Bulb and Socket Wiring Kit is
recommended for this vehicle.
2002-09 HUMMER H
2
Installation Instructions
BX4102
1. Pull the center grille insert forward to release
the four clips, one on each side and two in the
middle. Set insert aside to be reinstalled later.
The passenger’s side is shown in the photo
above.
2. Remove the two rubber inserts from the top of
the bumper. Set the rubber inserts aside to be
reinstalled later.
Installation Instructions:
1
1
2
2
Possible Location for the BX8869
Possible Location for the BX8869
Bulb and Socket Kit.
Bulb and Socket Kit.
Page 3 of 6
292-2625 Rev. G
12/17/10
Handling of some cosmetic parts
when installing this product may
require the use of protective covers,
rags, specialty tools, etc. to prevent
damage.
