Blue Ox BX3776 Скачать руководство пользователя страница 3

Страница: 3 / 8

1. Using

fl at screwdriver, remove four plastic

push pins from the radiator cover driver’s side
and with a 10MM socket, remove one bolt
from the outside edge (grey arrow). Set push
pins and bolt aside to be reinstalled later.

Vehicle Weight:

Motorhome mount tow bars are recommended for

use with this baseplate. Due to the design of the

removable tabs, the RangeFinderII, Adventurer,

and Ambassador tow bars can not be used. The

Acclaim tow bar may be used, but will not fold and

store on the front of the vehicle. Adapters, except

the BX8833 and BX88151, can not be used with

this baseplate.

Installation Notes:

The radiator cover,

fascia, washer reservoir and vent tube are
removed and reinstalled during installation of
the baseplate. Drilling is required. Trimming
of the lower frame support webbing is
required.

The dimensional variations between otherwise
identical vehicles can be considerable.
While the baseplate was designed for easy
installation, it may be necessary to tailor the
baseplate slightly to compensate for auto
manufacturer’s tolerances. These minor
adjustments may include fi ling a hole slightly,
bending electrical rods and/ or bending end
plates.

The BX8869 Bulb and Socket Wiring Kit is
recommended for this vehicle.

2008-09 Toyota Scion XB

(No Foglights)

Installation Instructions

BX3776

Installation Instructions:

Page 3 of 8

292-2984

3/2/09

2. On the passenger side, using a fl at

screwdriver, remove fi ve plastic push pins and
with a 10MM socket, remove one metric bolt
on the outside edge (grey arrow). Set bolt
aside to be reinstalled later.

Ô Ô

3. Above the grill, remove the cover. Using a

10MM socket, remove two metric bolts. Using
a fl at screwdriver, remove push pin from the
center (grey arrow). Set cover, bolts and pin
aside to be reinstalled later.

Ô Ô