BX2654
2015-16 Ford Focus Sedan
2015-16 Ford Focus Hatchback (No RS)
Installation Instructions
405-0490 Rev C
Page 2 of 9
9/17/15
Instruction Notes:
The fascia, horns and windshield washer fluid reservoir are removed and
reinstalled for the baseplate installation. Some drilling and trimming is required.
Place all components that are removed on a flat, sturdy surface. All items will be reinstalled unless
otherwise noted after the baseplate is installed.
The dimensional variations between otherwise identical vehicles can be considerable. While the
baseplate was designed for easy installation, it may be necessary to tailor the baseplate slightly to
compensate for vehicle manufacturer’s tolerances.
The BX8869 Tail Light Wiring Kit is recommended for this vehicle.
Drill a hole according to the tail
light wiring kit instructions.
NOTICE
• Handling of some cosmetic parts when installing this product may require the use of protective
covers, rags, specialty tools, etc. to prevent damage.
• When using power drills be aware of the dangers of torque and drill bit length.
• When using a reciprocating saw be aware of objects behind the cutting surface.
• Use a good quality paint to spray cut edges of frame to prevent rusting.
• Be sure that
ALL
electrical connections are plugged in and accessories are functioning properly
before
reinstalling the fascia
.
• The baseplate is computer tested to your vehicle’s GVWR, exceeding this weight will void the
manufacturer’s warranty.
• Be sure to use a sufficient amount of Loctite
®
Red on all bolt threads before tightening. Tighten all
bolts according to the torque chart provided.
• Dealer or installer be certain the user receives these instruction sheets.
• If the baseplate is in an accident, it must be replaced.
DO NOT
use it again! An accident can
cause unseen damage and using it again could result in more damage or serious injury.
DO NOT
use the baseplate if it is damaged or missing parts.
Baseplates with Serial #’s lower than 00045 will not fit the ST Hatchback models due to a
convenience link modification
