BX1975
2007-12 Dodge Caliber (No SRT)
Installation Instructions
292-2883 Rev F
Page 5 of 9
4/8/13
5. Remove the four (4) push pins from the
underside edge of the fascia. Do this on
both sides of the vehicle. Remove the
fascia from the vehicle.
6. Using a 10MM socket, remove the two (2)
bolts from the coolant line brackets.
7. On the passenger side, pry the coolant
line clips away from the frame to allow
clearance for cutting.
8. On the driver side, disconnect the sensor
wire from the side of the frame and bottom
of the bumper to allow clearance for
cutting.