BX1141
2019-2020 Jeep Cherokee Aluminium Bumper w/out Tow Hooks
(Includes Adaptive Cruise Control) (2-Speed Transfer Case)
Installation Instructions
405-0645 Rev D
Page 6 of 8
9/5/19
8. Slide the baseplate into place and start
the two (2) 10MM bolts with 3/8” flat
washers and lock washers on the bottom
of the bumper. Do this on both sides of the
vehicle.
9. Insert the three (3) existing 10MM bolts
with 3/8” flat washer and lock washer
(white) and one (1) nut (gray). Tighten all
hardware fully. Do this on both sides of the
vehicle.
10. Attach flat piece above the bumper to the baseplate using two (2) 3/8” x 4-1/2” bolts and nylon
lock nuts. Do this on both sides of the baseplate.
** Use Loctite
®
Red on all bolt threads and tighten
all bolts to the appropriate torque.**
** Use Loctite
®
Red on all bolt threads and tighten all bolts to the appropriate torque.**
