Blue Ox BX1141 Скачать руководство пользователя страница 1

BX1141

2019-2020 Jeep Cherokee Aluminum Bumper 

w/out Tow Hooks 

(Includes Adaptive Cruise Control) (2-Speed Transfer Case)

Installation Instructions

405-0645 Rev D 

Page 1 of 8 

9/5/19 

Please visit 

www.blueox.com

 for the latest version of these installation instructions.

Reference your vehicle owner’s 

manual for manufacturer’s towing 

specifications. 

Serial Number

If the front of your vehicle looks different than 

this, please contact us at (402)385-3051.

!

Failure to read and follow these instructions 

could result in separation of the towed vehicle 

from the tow bar, causing property damage, 

loss of towed vehicle, personal injury or death.

WARNING

Bolt Size

Grade 5

Grade 8

1/4”

10

14

5/16”

19

29

3/8”

33

47

7/16”

54

78

1/2”

78

119

5/8”

154

230

3/4”

257

380

Bolt Torque Specifications 

Torque in Foot-Pounds for Inch Bolts

 

Bolt Torque Specifications 

Torque in Foot-Pounds for Metric Bolts 

Bolt Size

Grade 8.8 Grade 10.9

6MM

6

8

8MM

16

22

10MM

31

40

12MM

54

70

14MM

89

117

16MM

161

230

18MM

222

318

Attachment Tab Height:  19.5”

Attachment Tab Width:   37”

Please read BOTH these Installation Instructions and the General Information sheet prior to 

installing or operating this equipment.

1.   Blue Ox

®

 towing products and accessories are 

intended to be installed by Blue Ox

®  

Dealers 

who are familiar with our products and have the 

equipment and knowledge necessary to do “fit 

work”. If needed, Blue Ox

®

 Dealers can be found 

at 

www.blueox.com 

or by contacting our Technical 

Service Department at (402) 385-3051.

2.   Many Blue Ox

®

 baseplates are designed to 

use existing holes and hardware to mount the 

baseplate to the towed vehicle. Even though bolts 

are there, do not assume they are adequate for 

baseplate mounting. Always use the hardware 

supplied in the hardware kit and existing hardware 

as specified in the installation instructions. 

Содержание BX1141











Отзывы: