BX1133
2012 Jeep Wrangler Unlimited Call of Duty
Installation Instructions
405-00281
Page 4 of 5
8/3112
3. If installing a breakaway switch, use
a 13MM socket to remove one (1)
of the existing bolts on either side of
the bumper.
1. Align the baseplate between the
bumper brackets. Insert one (1) of
the 1/2”-13 x 1-3/4” hex head bolts
and 1/2” lock washers in the bottom
hole and tighten securely. Do this
on both sides.
2. Using a rubber mallet, insert the
spacer tube into the top hole until
it is flush with the hole. Insert one
(1) of the 1/2”-13 x 1-3/4” hex head
bolts, 1/2” lock washers and 1/2” flat
washers and tighten securely. Do
this on both sides.
4. Align the hole of the breakaway
switch bracket and use the
fasteners provided.
