LAUNCH INSTRUCTIONS
Note:
Before any launch, refer to
the safety information section at the
beginning of this booklet to ensure safe,
successful launches. Your launch base
must be stable and level to launch.
1. Prior to your first launch, pull the air
pressure release valve loop a few times
to depressurize the tank inside and to
ensure its properly functioning. This
is a metal ring found underneath and
inside the launch base.
Note:
The spring
should pull back to its original position.
2. Turn on the launch base by pressing
the power button. The LED light to the right
of the power button will be a solid red
when the base is powered on and level.
3. Turn on the remote by pressing the
power button in the center. The left LED
light will flash red, the right LED light will
be off.
4. Place
your rocket
on the
launch tube
and ensure
it’s pushed
as far down
as it will go.
Ensure your
launch site
is free of
any hazards,
people, or
animals.
5
Содержание HIGH ALTITUDE ROCKET
Страница 1: ...INSTRUCTIONS LEARNING GUIDE...
