Blue Ice MI 7.5x2, Руководство пользователя

Страница: 13 / 29

13
7.3 Cleaning and sterilization procedure
7.3.1 Disassembling the product
)
Before operating the product again, check whether lumps of ice have been formed.
If any lumps of ice are in the canister, remove them before switching on the
product. If you operate the product in refrigeration mode during all night, it can
prevent accumulation of the condensed ice
*
When the granita is in the canister, do not turn off the slush supply switch.
It is because hard ice can form if the spiral does not rotate. If you turn on the slush
supply switch at this time, the spiral and motor can have damage.
Therefore, turn on the slush supply switch after melting the frozen granita.
+
The product has the shaft so that the gear motor (outside the canister) can drive
the spiral (inside the canister).
,
The product must be located in a well vented place.
If the temperature of the product is hot, check whether there is any heat generating
source, or air flow through the panel with a hole is blocked by the wall or box.
Keep at least 30 cm distance between the product and other materials.
#
To maintain optimal taste and guarantee the maximum product performance,
periodically perform cleaning and sterilization. Only the procedural instructions are
provided here.
$
Before disassembly and cleaning, be sure to remove all materials from the product.
For this, follow the procedure below.
- Place the power switch to I.
- Place the freezing/refrigeration switch to O.
- Place the containers beneath each slush supply and extract all materials from
the canisters.
- Place all control switches to O.
#
Remove the cover of the canister.
Warning
Before disassembly and cleaning, remove the power plug to block power supply.