DRYWALL MOUNT INSTALLATION/
MASONRY WALL MOUNT INSTALLATION/
CARE AND MAINTENANCE/
2.Level the hanger (A) at desired height and secure to wall with 2 screws (AA).
1.Hold hanger (A) level and at desired height on wall. Mark screw holes with pencil.
2. Drill 3/8 in. hole at screw hole marks. Unscrew toggle bolt (CC) from toggle and insert toggle bolt
through screw holes of hanger (A).
3. Re-screw toggle end to toggle bolt (CC) and insert both toggle ends into drilled holes. Tighten toggle
bolts (BB) to secure to wall.
1. Hold hanger (A) level and at desired height on wall. Mark screw holes with pencil.
2. Drill 1/4 in. hole at screw hole marks and insert anchor (BB).
3. Using screws (AA), secure the hanger (A) to the wall by screwing into the anchors (BB).
A
2
AA
1
2
CC
AA
3
1
3
Hang items directly on hooks. Wipe clean with damp paper towel. Safe working load: 50 lbs.
A
2
BB
AA
A
Carga de trabajo segura: 50 lb (22,68 kg)
