Blue Dry HD-BD988, Руководство пользователя

Страница: 7 / 12

7
BLUE DRY - HIGH SPEED HAND DRYER
7. AIR SPEED ADJUSTMENT
The dryer noise level can be varied by adjusting the motor speed.
However, when lowering the motor speed, the drying time will increase also.
The ability of this function will be dependent on the needs of the user.
The factory setting for dryer’s motor speed will be set at its highest speed.
See below for how to adjust the dryer speed:
1.
Use the key (supplied) to unlock and withdraw drawer (fig.1).
2.
Using a flat blade screwdriver, gently turn adjustment potentiometer shaft (fig.2)
clock-wise [CW] to increase power to maximum (shaft will hard stop; DO NOT
OVERTURN!). Turn tool gently CCW to reduce power as required (shaft will hard
stop; DO NOT OVERTURN!). Note that at minimum power the unit may not start if
low line Voltage condition exists.
3.
Insert the drawer back and lock the security screw.
8. HEATER ELEMENT SWITCH ON/OFF
This dryer has been designed with a
heater switch that can turn the heater
ON/OFF. The heater switch does not
affect the drying time. In cold weather
conditions, it may be more comfortable
if the heater is switched on when drying
hands. However, it will save a third of the
energy if it is turned off. This function
can be adjusted depending on the needs
of the owner. The factory setting for the
heater will be on. See below for how to
turn the heater ON/OFF. NOTE: With the heater switch on, the
heating element will automatically switch
OFF when the ambient temperature exceeds
25 degrees and switch on when the ambient
temperature drops below 24 degrees.
1.
Use key (supplied) to unlock and
withdraw draw (fig.1)
2.
Switch it to the right to turn ON the
heater. Switch it to the left to turn
OFF the heater (see fig.2)
3.
Insert the draw back and lock the
security screw.