Blue Demon BlueArc 160STI, Руководство пользователя

Страница: 23 / 25

20
Service
，
Maintenance, Transportation and Storage
The welder needs regular maintenance as following: Periodically clean
dust, dirt, grease, etc. from your welder. Every six months, or as
necessary, remove the cover panel from the welder and air-blow any
dust and dirt that may have accumulated inside the welder. Replace
power cord, ground cable, ground clamp, or electrode assembly when
damaged or worn.
MINOR AND ROUTINE MAINTENANCE
Store in a clean dry
facility free from corrosive gas, excess dust and high humidity.
Temperature range from 10F to 120F and the relative humidity not more
than 90%.
When transporting or storing the welder after use, it is recommended to
repack the product as it was received for
protection. (Cleaning is required before storage and you must seal the
plastic bag in the box for storage