Blue Coat SG210 series, Руководство по установке

Страница: 19 / 54

Chapter 2: First-Time Configuration 19
3
(Optional) On page 2, you also have the option to secure the serial port. For maximum security, Blue
Coat recommends that you secure the serial port.
The serial port allows you to configure and access the SG210 using a serial cable. This can pose a
security risk because anyone with access to the appliance can reconfigure the SG210 settings. This
optional step sets a password for the serial console setup, allowing only authorized personnel the
ability to reconfigure the appliance.
(
Figure 2-12: Initial Setup—Page two continued for securing the Serial Port (Optional)
WARNING!
If you set the serial console password upon initial configuration, the password is required for
accessing the serial console. If the password is lost, the appliance must be restored to its
original factory defaults (see
“Resetting the SG210 to Its Factory Defaults” on page 38).
You might still be able to access the Management Console or the CLI if you know the
administrative credentials — console username, password, and the enable password.
Do you want to secure the serial port? Y/N [Yes] Y
Enter setup password: *****
Verify setup password: *****
That password is easily guessed.
Choose another? Y/N [Yes] N
WARNING:
If you continue and enable the secure serial port it will
not be possible to enter the setup console without the
setup password. If the setup password is lost, assistance
from Blue Coat Systems will be required and all system
configuration may be lost. It is recommended that the
password be stored in a physically secure location.
Access to the CLI on the serial port will challenge for
credentials.
To enable the secure serial port, re-enter the setup password: