Blue Clean AR 117, Инструкция по эксплуатации

Страница: 9 / 20

9
U
nPacking
& a
SSembLy
• After unpacking the BLUE CLEAN POWER WASHER, lay out parts and accessories. Familiarize
yourself with the parts in the package by comparing them to those listed on the “PACKAGE
CONTENTS” page.
• The BLUE CLEAN POWER WASHER requires some minor assembly. You’ll need a Phillips
screwdriver to install the high pressure hose hook and the handle.
NOTE: Some parts may or may not be already assembled.
• Slide the handle onto the front side of the washer when facing it. This requires two screws.
(Fig. 1)
• Slide the hose hook onto the back side of the washer when facing it. This requires two screws.
(Fig. 2)
• Attach the 20’ high pressure hose to the unit by pressing firmly into the front port (Fig. 3) .
• Lock it into place by sliding locking mechanism into place
(Fig. 4)
.
• When not in use, disconnect the 20’ hose by pushing the lock the opposite direction and pulling
firmly on the hose again (Fig. 5).
Fig. 2
Fig. 4 Fig. 5
Fig. 1
Fig. 3