manualshive.com logo in svg

BLUE CHIP AOP-12D, Руководство пользователя

Поделиться
Скачать
BLUE CHIP AOP-12D Скачать руководство пользователя страница 13

Quick Installation 

Page 

7

Blue Chip Technology Ltd.

01270146.doc

Page 7

QUICK INSTALLATION

Before installing the card into your computer system, there are a number of
links which must be set.

The settings of these links will depend upon the computer system into which the
card is being fitted. Users unfamiliar with the settings of links should refer to
the section “Detailed Card Installation”.  For those unfamiliar with Binary and
Hexadecimal numbers, a brief explanation is included in the Appendices.

Base Address

Select an unused I/O address range for the card.  The card requires a block of
16 contiguous addresses.

The base address is set on jumper block JP3.  Fitting a link is equivalent to a
logic “0”.  Leaving the link open is equivalent to a logic “1”.  The card is
shipped with the default address setting of 300 

Hex.

  This is suitable for most

small installations.

Interrupts

The DAC generates interrupts at the end of a DMA transfer.  Interrupts IRQ2 to
IRQ7 are provided.  The PIO and the Timer cannot generate interrupts.

The interrupt setting is selected by a link on jumper block JP1. If interrupt
operation is not required leave the link off.

Содержание AOP-12D


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды