22
8/7/2020
•
Master User code:
You will only have one 4-digit Master User code, which gives you complete
access to your entire system. Protect this code, and do not share it with others.
•
Users
: Invite your trusted friends and family and keep track of who arms and disarms your
system. Users will be invited via email, and they can set their login password, security question,
and manage their notifications under
My profile
. As the Master User, you may invite any of the
following user types to your system:
1.
Admin
Users
get full access to all platforms and functionalities.
2.
Standard
Users
have access to monitoring, controlling, and limited settings management.
3.
Basic
Users
can only arm/disarm.
4.
Duress
User
is a code to disarm the system and notify the monitoring center. You may
only have one duress code, which is shared by all, to trigger a duress alert to the
monitoring center.
Arming your system:
You have a variety of options for arming and disarming your system with Blue by ADT. Depending on
your needs, you may choose one of three different arming modes on the keypad:
-
STAY:
Press the stay button and then enter your
User Code
to arm in stay mode.
o
Use this mode when you’re at home, entry and exit delays are on, and motion sensors are
off.
-
AWAY:
Press the away button and then enter your
User Code
to arm in away mode.
o
Use this mode when no one’s home, entry and exit delays are on, and motion sensors are
on.
-
NIGHT:
Press the night button and then enter your
User Code
to arm in night mode.
o
Use this mode when you’re in for the night, entry and exit delays are off, and motion
sensors are off.
-
OFF:
Press OFF and then enter your
User Code
to disarm your security system.
Note: By design, the exit and entry delays give you enough time to leave or enter your home without
setting off a false alarm.
Your keypad includes a panic button to be used in case of an emergency inside your home. This panic
button will immediately notify the monitoring center to dispatch emergency services to help you
automatically. The panic button can only be selected when you are at home.
To trigger the panic button:
•
Keypad
: Press and hold the star (*) and pound (#) buttons on the keypad at the same time for two (2)
seconds, triggering a panic alarm.
Press
OFF
to cancel a panic alarm siren locally on your keypad and smart home hub. Note: If you are
monitored, once a panic alarm is triggered, you cannot cancel emergency services from being dispatched.
•
Duress code:
You can set up a unique code (different from your
User Code
s), which you can use when
you feel threatened by someone forcing you to disarm from inside your home. When you enter this code,
the alarm will not sound — but a special duress message is sent to the monitoring center, and emergency
services will respond appropriately.
