10.
3.
Fasten the
Waist Belt Buckle
around your waist and
pull the
Webbing
to tighten.
* IMPORTANT! ALWAYS ensure that the
waist belt
fits securely againt your body at all times without
creating a gap.
4.
Once the Waist Belt is properly fitted, lean forward
slightly and have your partner lift baby up and place
them on your back. Their legs should wrap around
your waist.
* Either you or your partner should be supporting baby
securely throughout the process of putting baby in the
carrier, until all the buckles and straps are properly
fastened and adjusted.
5.
With your hands supporting baby, have your partner
pull the carrier up over baby’s back.
6.
Once the carrier body is up, your partner will secure
it closed by attaching first the
Side Closure Buckles
and then the
Head Support Buckles
. You will hear a
‘click’ when secure.
CORRECT INCORRECT
9.
Folding Carrier into the Waist Belt Pocket
1.
Gather
Shoulder Straps
behind the carrier body.
2.
Roll carrier body down towards the
Waist Belt
.
3.
Tuck the carrier body into the
Waist Belt Pocket
and
close the zipper. Fasten the
Waist Belt Buckle
.
2
Carrier use for: Back Carry Position
* IMPORTANT! Baby must be able to fully sit up on his or her own before being worn in the
Back Carry Position.
* STOP! First time users, DO NOT attempt to use the carrier in the Back Carry Position
without the assistance of a second adult. We highly recommend always using the assistance
of a second person.
* Either you or your partner should be supporting baby securely throughout the process
of putting baby in the carrier, until all the buckles and straps are properly fastened and
adjusted.
* Your baby should always be comfortable. If your baby is fussy it could be an indication
that he or she is not properly positioned. If this occurs, take your baby out immediately and
adjust.
*
When using this carrier in the Back Carry Position, you should fit it to the user before
placing the baby in the carrier.
NOTE: The carrier parts in
bold
can be found on the carrier illustrations.
1.
Place your arms through the
Shoulder Straps
like
you are putting on a jacket. The carrier should be
hanging down behind you, with the
Side Closure
Buckles
and
Head Support Buckles
open.
2.
Fasten the
Back/Chest Buckle
. You will hear a ‘click’
when the buckle is secure. Pull the
Back/Chest
Strap
to tighten.
NOTE: The height of the
Back/Chest Strap
can be adjusted
by opening the
Height Adjustment Snaps
and sliding
the
Back/Chest Strap
to the desired height. Fasten all
the
Height Adjustment Snaps
. The strap should lay in a
comfortable position on your chest.
