Blue Bird Micro-Bird A1VC, Руководство водителя

Страница: 40 / 56

MICRO
BIRD
38
D R I v E R S h a N D b O O k
l
Glass Replacement
The glass used in Blue Bird buses meets Federal Motor Vehicle Safety Standards 205
and 217. When a piece of glass is broken, it should be replaced with an identical
piece. The following instructions are for replacing glass in the side split sash window,
rear and rear side vision, entrance door, and windshield.
[WARNING] When replacing broken or damaged glass use extreme care at all
times to prevent personal injury. This includes the use of proper replacement
parts, tools, and personal protective equipment, such as gloves and safety
eyeglasses.
Split Sash
1. Remove four screws securing window frame to bow (Figure 1).
2. Pull window to inside of body and remove (Figure 2).
3. Remove six screws (three on each side of window) holding main assembly
together (Figure 3).
4. On bottom part of window, simply pull aluminum channel off top and bot-
tom of glass (Figure 4).
5. To remove glass from top part of the window, remove six screws holding
frame around glass (Figure 5).
6. Reassemble window by reversing above procedure.
7. Apply weather seal caulking around window frame on outside of body to
prevent leaking.
Figure 1
Figure 2
Figure 3
Figure 4