Page | 11
No Power
Power adaptor is not connected
properly
Mains supply is off
If using Remote, battery
needs replacing
Make sure power adapter is firmly
plugged in.
Test with another appliance /different
socket.
Replace battery
No sound from
speakers
Volume control is turned down
Speaker cables not connected
Source selection incorrect
Check volume control on front of v30
and volume control on remote control
Check connections on rear of v30 and
speakers
Check Source selection
Remote control not working
Low or dead battery
Remote not being pointed
in the correct direction, or
within range
Replace battery
Point the remote control in the direction
of the v30 within 20ft (6.1M)
Distorted sound
Volume level is set too high
Source device sound level
is set too high
Decrease volume of v30
Decrease output level of source device
Acoustic image
has insufficient
low range tonal
quality
The speakers have not been
wired correctly and are “out
of phase” with each other
Ensure that the red (+) and black (-)
wires have been correctly connected
at the speakers and v30. The speaker
cable has a red line running along the
length to determine the (+) side
Radio interfer-
ence
Equipment is situated too
close to a radio
Move the speakers or amplifier away
from the radio.
