WWW.BLUDOT.COM
SHALE WALL MOUNT rev00 - PAGE 2 OF 2
2
3
Cabinet hanger
bracket
will fit over
wall bar.
Front adjustment
screw changes the
yaw of the console.
Rotate screw clockwise
to move the console
closer to the wall.
wall bar
Bottom adjustment
screw changes the
pitch of the console.
Rotate screw
clockwise to move
the console up.
TO MAKE SURE EACH
OF THE THREE CABINET
HANGERS WITHIN THE CONSOLE
LATCH OVER THE WALL BAR,
EXTEND THE CABINET HANGER
BRACKETS BY TURNING THE
FRONT ADJUSTMENT SCREW
COUNTER CLOCKWISE.
TO EFFECTIVELY CHANGE
THE POSITION OF THE CON-
SOLE, ADJUSTMENT SCREWS
MUST BE CHANGED ON
ALL THREE OF THE CABINET
HANGERS. USE A LEVEL TO
CHECK FOR SQUARENESS. IF
SAGGING OCCURS ADJUST
CENTER CABINET HANGER
1
2
1
2
Visually inspect
that each cabinet
hanger bracket is
latched to the
wall bar.