3 | 8 4 4 . 4 2 5 . 8 3 6 8
B R O W S E R L O W A D D - O N B O O K C A S E
PT. 9016 x 1
wall fastener location
measuring tool
rear upright block
3/16” gap between
upright and bolt head
Step 02
M A R K R E A R U P R I G H T WA LL LO CAT I O N A N D LO O S E N B O LTS .
Wall fasteners are not provided, please consult your local
hardware professional to determine the hardware best suited
for your wall type.
Position the measuring tool against the wall with the slot
resting on top of the rear upright block. Use a leveling device
to ensure that the measuring tool is level. Mark and drill the
wall fastener locations on the wall depending on the hardware
being used. Repeat for remaining rear upright block locations.
Loosen exterior bolts on side upright that is being extended,
leaving a small gap as shown for shelf attachment on later
steps.