background image

5/22/2018

BluSnap User Guide | BluArmor Helmets

https://bluarmorhelmets.com/pages/blusnap_userguide

9/13

Your cooling  lter is housed in a cartridge. It doubles up as a dust stopper, and needs to be
periodically cleaned. The period will depend on how often you ride, and the level of dust on the roads
you frequent - check your  lter every two weeks and clean as you see  t. To remove the  lter
cartridge, remove the top cover and pull out the  lter (the  gure illustrates where you should hold
and pull).

To clean the  lter, place it under running tap water and use a toothbrush to wash off the dust. The

lter will need to be replaced periodically - either every 5000 kilometres or every 6 months, whichever

happens sooner. Replacement  lters are available on our website.

CAUTION: If the cooling  lter is not cleaned periodically, its life-time will reduce.

Cleaning the Grill/Coarse Filter

BluSnap's grill integrates a coarse  lter to block large dust particles, insects, etc. This coarse- lter
should be inspected and cleaned on a regular basis. To pull out the grill, simply remove the top cover
and slide out the grill (as shown in the  gure)

Содержание BluSnap














Отзывы: