2014-07
1 866 907 0122 blubathworks.com
4
3
4
• Feed the washer and nut onto the control
data cables.
• Hand tighten onto the controller unit bodies.
Help may be required at this stage.
• Push fit the ‘
front
’ control wheels onto
controller unit.
• If required the controller unit can be removed
from the controller unit/threaded sleeve by
pulling off the front control wheel, turning the
controller unit counter-clockwise and lifting out.
• To refit, position the controller unit’s in the slots
and turn clockwise.
5
6
• Repeat steps 1-4 for the second wheel in case of PT7004 & PT7006
• Connect the data cable(s) control to the relevant control mixer.
(see install guide for TEE015, TEE030 or TEE030S)
