Blu Dash JR, Руководство по обслуживанию

Страница: 4 / 25

Take specially care of soldering, because Land of PCB is small and weak
in heat.
Surely tune on/off while using AC power plug, because a repair of batter y
charger is dangerous when tuning ON/OFF PBA and Connector afte
r
disassembing charger .
Don't use as you pleases after change other material than replacemen t
registered on SEC System .
Otherwise engineer in charge isn't charged with problem that you don' t
keep this rules .
ESD (Electro statically Sensitive Devices)
Precaution
Several semiconductor may be damaged easily by
static electricity.
Such parts are called by
ESD(Electrostatically Sensitive Devices),
for example IC,BGA chip etc. Read
Precaution below. You can prevent from ESD damage
by static electricity.
Remove static electricity remained your body
before you touch semiconductor or parts with
semiconductor. There are ways that you touch an
earthed place or wear static electricity prevention string on
wrist.
Use earthed soldering steel when you connect or
disconnect ESD.