2016-03
1 866 907 0122 blubathworks.com
8
3
Setting the memory/pre-sets
Up to three memory settings can be stored
To set memory 1
1. Press control once
2. Set the desired temperature as indicated step 2
3. Press & hold down the control until the control flashes Purple,
then release, water off
4. The temperature is now stored by 2 Purple flashes
To set memory 2
1. Press control twice
2. Set the desired temperature and flow as indicated step 2
3. Press & hold down the control until the control flashes Purple,
then release, water off
4. The temperature is now stored by 2 Purple flashes
To set memory 3
1. Press control three times
2. Set the desired temperature and flow as indicated step 2
3. Press & hold down the control until the control flashes Purple,
then release, water off
4. The temperature is now stored by 2 Purple flashes
To access a stored memory; press the control once to select
memory 1, twice for memory 2 and three times for memory 3.
Pre-sets Factory Settings
Quick Access 1
Cold, medium flow (Blue)
12°C
53.6°F
Quick Access
Warm, medium flow (Yellow)
30°C
86°F
Quick Access 3
Cold, medium flow (Red)
40°C
104°F
NOTE: These pre-sets access can be changed to the desired temperature by following step #3
